SNMPD - Simple Network Management Protocol Daemon to respond to SNMP requests MRTG - Multi Router Traffic Grapher
MRTG uses SNMPD to collect information on the Network Traffic of a Computer/ Router.
apt-get some tools and choose defaults:
apt-get install mrtg apt-get install snmpd //Daemon Storing Data apt-get install snmp //Daemon Collecting Data from various devices/servers
Edit /etc/snmp/snmpd.conf and change the following: change: agentAddress udp:127.0.0.1:161 to: agentAddress udp:161
change: rocommunity public default -V systemonly to: # rocommunity public default -V systemonly
change: #rocommunity public localhost to: rocommunity public localhost
add: rocommunity public ip.address.of.snmp.monitoring.server
Removing as it was old sarge/etch config
com2sec paranoid default public
#com2sec readonly default public
#com2sec readwrite default private
to:
<br>
#com2sec paranoid default public
com2sec readonly 127.0.0.1 public
#com2sec readwrite default private
Edit /etc/default/snmpd and change the following:
SNMPDOPTS='-Lsd -Lf /dev/null -p /var/run/snmpd.pid 127.0.0.1'
to
SNMPDOPTS='-Lsd -Lf /dev/null -p /var/run/snmpd.pid'
Restart the snmpd server: /etc/init.d/snmpd restart
Edit /etc/mrtg.cfg and add/replace with the following: # Global configuration WorkDir: /var/www/mrtg WriteExpires: Yes <br> #For every machine Targetname-of-machine: 2:public@127.0.0.1 MaxBytesname-of-machine: 1250000 Titlename-of-machine: PageTopname-of-machine: <TABLE> <TR><TD>System:</TD><TD>kartbuilding on phidebian</TD></TR> <TR><TD>Maintainer:</TD> <TD>Stephen Burke</TD></TR> <TR><TD>Description:</TD><TD>Debian PC</TD></TR> <TR><TD>Max Speed:</TD><TD>10 Mbits/s</TD></TR> <TR><TD>Ip:</TD><TD>136.201.1.250</TD></TR> </TABLE> #Above table html info to be in 1 space.
Run mrtg manually a few time to place logs - it will give errors on first 3-5 runs. There is an entry placed in /etc/cron.d for mrtg to take over then. ./mrtg -c /etc/mrtg.cfg
In the “Target” line you see the number 2 we found before, and in “MaxBytes” we have set how many bytes the device maximum can transfer (10Mbit * 1000000bit/Mbit / 8byte/bit = 1250000byte).
snmpd listens on ipaddress:161 where 161 is udp. The following iptables firewall rule is needed: iptables -A INPUT -p udp –dport 161 -j ACCEPT
Helpful Info To generate an Automatic mrtg config: cfgmaker public@ipaddress » /etc/mrtg.cfg
To check snmb Info: snmpwalk -v 1 -OS -c public localhost
Information got from:
http://apt-get.dk/mrts/ <br> http://www.netadmintools.com/art390.html <br> http://myitforum.com/articles/16/view.asp?id=3928 <br> http://www.debianhelp.co.uk/mrtg.htm
No final configs have been written.
snmpwalk on a UPS will not reveal all the information. Try the following to get more information: snmpwalk -v 1 -c public Network_Name_of_UPS .1
Here are the relevant links (rare) which have been found:<br> https://lists.oetiker.ch/pipermail/mrtg/2005-May/030094.html<br> http://www.cuddletech.com/articles/snmp/node13.html<br> http://www.linuxhomenetworking.com/wiki/index.php/Quick_HOWTO_:_Ch23_:_Advanced_MRTG_for_Linux<br> http://www.skolelinux.no/~klaus/sarge/x3579.html<br>