Differences

This shows you the differences between two versions of the page.

--- smokeping [2022/07/19 19:52] – created 85.134.209.200
+++ smokeping [2022/07/21 22:50] (current) – Updated formatting and added current config admin
@@ Line 3: / Line 3: @@
 Smokeping is a very useful daemon which can run a number of checks at certain intervals. Out of the box it will perform ping tests on hosts every 5 minutes. It can however be setup to monitor websites and response/connection times.
+**Updated for Debian Bullseye**
+<code>
  apt-get install smokeping
- <del>vi /etc/smokeping/config</del>
+By default apache2 config gets enabled:
+/etc/apache2/conf-enabled/smokeping.conf
+So http://domain/smokeping  will be work straight away. May want to change.
  vi /etc/smokeping/config.d/General
  #update contact and name etc.
+</code>
 ===== Basic Config and Setup =====
+<code>
 vi /etc/smokeping/config.d/Targets
  + Burkesys_Cluster
@@ Line 23: / Line 32: @@
  title = twister.burkesys.com
  host = twister.burkesys.com
+</code>
 With some trial and error you'll get it. Apache should be setup with the following config: /etc/apache2/conf.d/smokeping. Just go to http://server/smokeping/smokeping.cgi
@@ Line 28: / Line 39: @@
 ===== Curl Config for Smokeping to Test Websites =====
+<code>
  vi /etc/smokeping/config.d/Probes
  #Under *** Probes ***, you will see FPing. Add this under it.
@@ Line 50: / Line 62: @@
  /etc/init.d/smokeping restart
+</code>
 ===== DNS Test Config for Smokeping to Test Websites =====
+<code>
  vi /etc/smokeping/config.d/Probes
  + DNS
@@ Line 69: / Line 83: @@
 /etc/init.d/smokeping restart
+</code>
 ===== Debug smokeping =====
+<code>
  /etc/init.d/smokeping stop
  smokeping --debug
+</code>